92mm PC Fan Spacer and SFF Riser 5mm to 50mm | CUBEIFY

This 92mm PC fan spacer and SFF riser adds clearance between a standard 92mm fan and a compact case panel, mesh, grille or radiator. It is available in 5mm increments from 5mm to 50mm and can be used as a stand-off, riser or short airflow shroud.

Increasing blade clearance can reduce turbulence and noise caused by a fan running close to a restrictive grille or mesh. On a radiator it also creates a consistent gap between the fan and fin surface. Results depend on the fan, radiator and case layout.

The standard version is made in PETG with an 80°C (176°F) heat tolerance, selected for better heat resistance than PLA in warm PC, radiator and ventilation environments. For installations that may run hotter, a higher-temperature material option is available on request for most sizes; contact us before ordering to confirm suitability.

Available sizes

• 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm and 50mm.

Technical information

• Compatibility: standard 92mm PC fan and radiator mounting pattern.
• Material: PETG.
• Maximum heat tolerance: 80°C (176°F).
• Mounting: longer fan screws or radiator hardware may be required depending on spacer depth; screws are not included.

Higher-temperature option

A higher-temperature material version is available on request for most fan spacer sizes. If the spacer will sit in a warmer enclosure, exhaust path or other elevated-temperature environment, contact us before ordering with the expected temperature and required spacer depth.

Custom sizes

Spacer depths over 50mm can be made as a custom order. Send the required fan size and spacer depth before ordering so the fit can be checked.

Made to order

This product is made to order.